Suunto Measurements!

[Jeff_C]

OK upon request I have made some measurements of my Suuntos...

All measurements are approximate. (done with calibers and an old measuring stick)

Y&B CORE:
Case width not counting buttons (9:00-3:00): 50mm
Case width 12:00-6:00: 50mm
Thickness: 15mm
Inside of bezel to inside of bezel: 42mm
Crystal Diameter: 39mm

Vector:
Case width not counting buttons (9:00-3:00): 53mm
Case width 12:00-6:00: 61mm
Thickness: 16mm
Crystal Diameter: 35mm

Observer:
Case width not counting buttons (9:00-3:00): 46mm
Case width 12:00-6:00: 48mm (bottom of lug to top of lug)
Case width 12:00-6:00: 40mm (case without lug)
Thickness: 14mm
Crystal Diameter: 30mm

Yachtsman (X-Lander):
Case width not counting buttons (9:00-3:00): 53mm
Case width 12:00-6:00: 54mm (bottom of lug to top of lug)
Case width 12:00-6:00: 48mm (case without lug)
Thickness: 17mm
Crystal Diameter: 35mm

http://www.fototime.com/1172AEB01D231D2/standard.jpg

Suunto Elementum Ventus:
Using crude calipers and a measuring stick, I measure the following (definite APPROXIMATIONS):
Case (From 10:00 to 5:00) = 45mm
Case thickness = 14mm
Lug Width = 22mm
Strap = 22mm non tapered
Strap thickness = 5mm
Crystal Diameter = 40mm
Pushers (distance from case) = 5mm
Scrolling pusher (distance from case) = 7mm

http://www.fototime.com/21FF386981A696B/standard.jpg

[deepcdvr]

OK upon request I have made some measurements of my Suuntos...

All measurements are approximate. (done with calibers and an old measuring stick)

Y&B CORE:
Case width not counting buttons (9:00-3:00): 50mm
Case width 12:00-6:00: 50mm
Thickness: 15mm
Crystal Diameter: 42mm

Vector:
Case width not counting buttons (9:00-3:00): 53mm
Case width 12:00-6:00: 61mm
Thickness: 16mm
Crystal Diameter: 35mm

Observer:
Case width not counting buttons (9:00-3:00): 46mm
Case width 12:00-6:00: 48mm (bottom of lug to top of lug)
Case width 12:00-6:00: 40mm (case without lug)
Thickness: 14mm
Crystal Diameter: 30mm

Yachtsman (X-Lander):
Case width not counting buttons (9:00-3:00): 53mm
Case width 12:00-6:00: 54mm (bottom of lug to top of lug)
Case width 12:00-6:00: 48mm (case without lug)
Thickness: 17mm
Crystal Diameter: 35mm

http://www.fototime.com/1172AEB01D231D2/standard.jpg
Thanks again... Thought the core would be the biggest

[Jeff_C]

Yeah, the Vector has those little "wings" at 9:00 and 3:00... See how that case is way more asymmetrical than the core case?

[deepcdvr]

Yeah, the Vector has those little "wings" at 9:00 and 3:00... See how that case is way more asymmetrical than the core case?


Yeah, I'm wearing mine right now... It's still my favorite watch by far because it's light and comfortable and TOUGH

[BruceS]

Thanks for posting that Jeff. Very helpful to have real measurements!

[ecalzo]

very helpful thanks a lot......

[Mp-1968]

Hi, I'm new here and I think to buy a Core All black (when it officialy available).
Thank you for posting the measures but I see that's missing a very important measure: the strap size, it's 22-24 mm ?

Can you report this measures too ?

I think to use a nato strap, I see some photos and is very good on this watch for me.

Thank you again, best regards.

[Jeff_C]

I dont have a model that has those lugs Sorry...

But I THINK its 24mm.

[MagnumIP]

Here are some 'official' measurements for your list :-!



Core 49,3mm x 14,4mm for Black Yellow and Light Green and 15mm for other models.


Lumi 42,5mm x 13,9mm


Vector 57 x 50 x 16.5mm - 55g


Metron 57 x 50 x 15mm - 55g


Observer 48 x 44 x 14 mm – 70g titanium housing with titanium strap/88g Stainless steel housing with elastic strap/106g Stainless steel housing with stainless steel strap

X6 44 x 44 x 13 mm - 54g

X6M 52 x 49 x 15 mm - 96g

X-lander 57 x 50 x 15mm – 60g　

Advizor 57 x 50 x 16.5mm - 55g

X3HR 55 x 47 x 15mm - 50g

X6HR 50 x 46 x 14 mm – 54g

X6HRM 52 x 49 x 15 mm – 96g

X9 56 x 56 x 17 mm - 76g

X9i 54 x 54 x 18 mm – 77g

Altimax 57 x 50 x 16,5 mm – 55g　

S6 44 x 44 x 13 mm - 54g

S-lander 57 x 50 x 15mm – 60g

t6 44 x 44 x 13 mm - 56g

Yachtsman 57 x 50 x 15mm - 60g

Regatta 57 x 50 x 16.5mm - 55g

Mariner 57 x 50 x 16.5mm - 55g

M9 56 x 56 x 17 mm- 3,6 oz.



t1, t3 and t4 dimensions:

Thickness: 1,32 cm
Visible LCD: 2,57 cm
Total Display: 3,58 cm
Casing diameter: 4,22 cm
weight: 45/50/65 g - depending on the strap

[zippofan]

Hi, I'm new here and I think to buy a Core All black (when it officialy available).
Thank you for posting the measures but I see that's missing a very important measure: the strap size, it's 22-24 mm ?

Can you report this measures too ?

I think to use a nato strap, I see some photos and is very good on this watch for me.

Thank you again, best regards.

24mm lugs on my Core O/B, which opens up a whole world of strap choices :-!
I put a PVD Pre-V buckle on my Suunto black rubber strap, I think it looks really good.

Cheers,
Griff

[ejunge]

Gang, I took measurements with a pair of calipers and have some more accurate measurements on my X9mi

Width 53.7 mm (incl Buttons) 50.5 mm (without buttons)
Face (crystal) 33.7mm (wide 9-3) by 28.6mm (high 12-6)
Bezel (outside dimensions) 45.0 mm (wide) by 54.3 mm (high)
Thickness 18.4 mm

[Juzailee]

Well does the lugs for other core besides B/Y and L/G Core sold seperately?
or is there any other way to attached strap using B/O Core into B/Y for example??