LinkBack URL
About LinkBacksLM-2 drawing:
http://ocean7watchco.com/LM-2drawing.jpg
The dial and bezel are both black. The bezel is a different shade so that it will stand out in the drawing.
|
LM-2 drawing:
http://ocean7watchco.com/LM-2drawing.jpg
The dial and bezel are both black. The bezel is a different shade so that it will stand out in the drawing.
Last edited by MitchSF; September 21st, 2006 at 18:20.
We removed the triangle on the rotating bezel, and extended the marker at 12:00 up into the bezel. I think the design works when the bezel is set at 12:00, but otherwise, I'm not so sure. The luminous material on the bezel looks white in the drawing, but it is C3, and it will match the dial. Also, I think the one minute index mark on the bezel should be removed.
Mitch
http://www.ocean7watchco.com/LM-2drawing2.jpg
Last edited by MitchSF; September 22nd, 2006 at 20:12.
I'm not sure this works, either. Next week we'll try the hollow triangle at 12:00.
Mitch
http://www.ocean7watchco.com/LM-2drawing3.JPG
Last edited by MitchSF; October 20th, 2006 at 02:00.
The sample is made of steel. The finish is blasted to make it look like titanium. Real watches will be titanium. Notice that the lugs are slimmer than in the cad drawing. This is a much more accurate representation of the production watch.
Last edited by MitchSF; December 30th, 2006 at 20:53.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
