insider info on the Dagaz Tsunami2

[Raoul Duke]

As a noobie, can someone post the case & bezel specs please...pleeaase :)

it will be very close to the original Seiko 6105 diver. count on the bezel dimensions to be about the same as the Tsunami/SKX bezels so as to utilize the same inserts

[VladdyMak]

it will be very close to the original Seiko 6105 diver. count on the bezel dimensions to be about the same as the Tsunami/SKX bezels so as to utilize the same inserts

Are we talking the smaller symmetrical 6105 or the more popular, asymmetrical 6105-811X??
Please be the bigger and better one!!!

[Bwana1]

it will be very close to the original Seiko 6105 diver. count on the bezel dimensions to be about the same as the Tsunami/SKX bezels so as to utilize the same inserts

I assume you're referring to the T2 ?.....May I ask the pecs on the T1 then ? Thanks

[VladdyMak]

I assume you're referring to the T2 ?.....May I ask the pecs on the T1 then ? Thanks

http://www.watchfreeks.com/view_topi..._id=136&page=1

[Raoul Duke]

Are we talking the smaller symmetrical 6105 or the more popular, asymmetrical 6105-811X??
Please be the bigger and better one!!!

On my phone, so I'm keeping it short..... Asym

I assume you're referring to the T2 ?.....May I ask the pecs on the T1 then ? Thanks

44mm, 22mm lugs, ne15 regulated in 6 positions, sapphire, 300m tested to 125% of WR, LE 500 total, 3x sealed crown

[Raoul Duke]

Watch Review: Dagaz/10Watches Tsunami - Watch Review - General Watch Discussions - Watch Freeks

Thanks for linking to my review

[Raoul Duke]

Damn phone ...

[poxyhen]

it will be very close to the original Seiko 6105 diver. count on the bezel dimensions to be about the same as the Tsunami/SKX bezels so as to utilize the same inserts

Thanks RD, however I have asked Jake advice on a mod for my T1 UDT Frog and was told that the SKX BB insert is not suitable for use with the 5.05mm sapphire of the Tsunami, and that the only suitable bezel inserts are the ones specifically designed for the T1 (and shown on the Dagaz Tsunami parts page on his website). This was a little disappointing as I thought the red of the BB insert would look excellent on my UDT!

[Raoul Duke]

Thanks RD, however I have asked Jake advice on a mod for my T1 UDT Frog and was told that the SKX BB insert is not suitable for use with the 5.05mm sapphire of the Tsunami, and that the only suitable bezel inserts are the ones specifically designed for the T1 (and shown on the Dagaz Tsunami parts page on his website). This was a little disappointing as I thought the red of the BB insert would look excellent on my UDT!

it will fit with slight modification, but it is not sloped up like the T bezel inserts, which means the crystal sits proud of the bezel instead of flush with the curve of the crystal. you will lose an important part of the intended design of the watch if you do that. i would have liked a few different inserts on both of mine, but it really doesn't look good with the crystal sticking up

[poxyhen]

it will fit with slight modification, but it is not sloped up like the T bezel inserts, which means the crystal sits proud of the bezel instead of flush with the curve of the crystal. you will lose an important part of the intended design of the watch if you do that. i would have liked a few different inserts on both of mine, but it really doesn't look good with the crystal sticking up

Yeah, that makes sense - hopefully though Jake will come up with at T2 bezel/crystal design which will allow for the bulk of the aftermarket SKX inserts to be used