Altofondale from Italy

[scubafox]

Goodevening, this is my first post here even if i follow WS since long time.
I' m glad to present to you our project. It consist of 20 pz of a professional diver watch we are making in Italy. All the suppliers are italian and we are a group of diving watches enthusiastic. We are going to test it as per ISO 6425 procedures to 1000m and we are engineering the system to test it for a saturation diver.
The watch has a ETA 2824-2 standard grade inside, Stainless steel 316 L, 44 mm with Verlux saphir 4 mm cristal.
Any comments or suggestion are greatly appreciated.
Up to date will follow.
Thank you

This is our forum in italian:
Professional Diver Project
This is our Facebook page:
Professional Diver Project | Facebook
Her are some pictures:

[DEPA]

looks fantastic, i just think there is a small problem with the crown and the topring. the crown looks like beeing fixed on the topring. how do you rotate the topring?

[scubafox]

looks fantastic, i just think there is a small problem with the crown and the topring. the crown looks like beeing fixed on the topring. how do you rotate the topring?

Yes, you are right. The rendering is not correct. I'll post Some other drawing that will clarify the real crown position.

[Chronopolis]

Handsome design!
Looking forward to seeing the finalized drawings!
But what is 'GAS BREAK COUNT UP'? (Mi dispiace, ma non sono diver.)

[scubafox]

Hi, here are some other drawings also for the case back. Here you can see the crown in the correct position.

[scubafox]

Hi, here are some other drawings also for the case back. Here you can see the crown in the correct position.

The case back in the final configuration will be whit more rounded shape, non flat.

[DEPA]

yes understand what you mean but the crown will still stuck on the bezel once you start rotating it. i am sure you guys will do the right things in order to avoid that.

[scubafox]

A 2° model is engineering, 2000 m. We have just started with it. Any suggestion is really very much welcome and strongly appreciated.

[joey1320]

A 2° model is engineering, 2000 m. We have just started with it. Any suggestion is really very much welcome and strongly appreciated.

I like the designs, they look insanely nice.

A couple of things I would say tho, I would remove the strident, it has been used plenty already. The
brands Sottomarino and Prometheus(by Invicta) both use the trident.

Also I would place the scuba mask above the extreme, it is more pleasing to the eye, in my opinion.

Gold luck with the project.
Sent from my Desire HD using Tapatalk 2

[Chronopolis]

+1

Having the Trident AND the mask - and both are roughly the same size - seems not like a good idea.

I would remove the trident, it has been used plenty already. The
brands Sottomarino and Prometheus(by Invicta) both use the trident.

Also I would place the scuba mask above the extreme, it is more pleasing to the eye, in my opinion.