I try to answer all the questions in one message.
I have a tendency to send the whole watches to Favinov. Usually he has some very good ideas like the hand selection. Also all Komandirskies (350) were equipped with Amphibia crystals (or actually tension ring). This was made to improve the waterproofing. And at the same time the bezel was relumed and coated with some sort of nano-ceramic coating to enhance durability.
Strap of the white Komandirskie comes from eBay / koche-vikto and he still have those.
I haven't found any faults within the lume and it seems long lasting. I can read these watches in low light conditions.
I taped up the crystal and case an sprayed it in the back yard. The can isn't really made for such tiny work. I went from all angles for even coverage. I waited maybe 7min out of the recommend 10, then did it again. I'm impatient.
I got a little over spray and took it off with acetone, then re-brushed the lugs so they'd all match again. That one has a SS case.
Sent from my VS987 using Tapatalk
Just a couple of mine....
3x 710s and 1x100, all with bezels, IIRC all Boris bezels, inserts, can't remember, the seiko hands from speedtimerkollektion, straps can't remember either.
Sent from my ONE E1003 using Tapatalk
Last edited by munichjoe; April 5th, 2017 at 00:13.
Do seiko hands need to be reamed or crimped down?
There are currently 2 users browsing this thread. (0 members and 2 guests)