GB-5600 Resin Compatiblity
Like Tree11Likes

Thread: GB-5600 Resin Compatiblity

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    Member stpete's Avatar
    Join Date
    Mar 2011
    Location
    SoMD
    Posts
    1,070

    GB-5600 Resin Compatiblity

    I like some of the new GB-5600 resin. But, not sure what else it'll fit. Does anyone have one yet that can figure out where on this chart the GB fits?


    Originally Posted by kumazo

    Current
    DW-8200MS "Kermit in Smoke" Frogman
    DW-8200F-4 Red Frogman
    GW-200-2 "Navy" Frogman - modded
    DW-5000SP "Bloody Project Team Tough mod"
    DW-9900 Frogman
    DW-5700 with 5600EH crystal "Screwback Eric Haze"
    GW-5000
    Beater G-3110

  2. #2
    Member GShockMe's Avatar
    Join Date
    Mar 2011
    Location
    USA
    Posts
    6,403

    Re: GB-5600 Resin Compatiblity

    Quote Originally Posted by kumazo View Post
    Post for the third time
    Attachment 883920
    GB-5600AA-1AJF
    Kumazo has it. Please please please.. need a review.

  3. #3
    Member
    Join Date
    Jun 2011
    Location
    Raincouver, BC, Canada
    Posts
    3,679

    Re: GB-5600 Resin Compatiblity

    would the real Kumazo please stand up !

    LOLz
    _________________
    Selfishness is not living as one wishes to live, it is asking others to live as one wishes to live.Oscar Wilde

  4. Remove Advertisements
    WatchUSeek.com
    Advertisements
     

  5. #4
    Member kumazo's Avatar
    Join Date
    Dec 2008
    Location
    Kansai region
    Posts
    374

    Re: GB-5600 Resin Compatiblity

    GB-5600AA (module #3409) bezel is compatible with DW-5600E (module #1545/3229).

    Name:  CIMG3112s.jpg
Views: 5170
Size:  161.1 KB

    Name:  CIMG3113s.jpg
Views: 4520
Size:  136.9 KB
    GB-5600AA-1AJF / DW-5600EG-9


    11/26 add
    Name:  5600_Series2.jpg
Views: 3063
Size:  108.1 KB
    Last edited by kumazo; November 26th, 2012 at 13:47.

  6. #5
    Member stpete's Avatar
    Join Date
    Mar 2011
    Location
    SoMD
    Posts
    1,070

    Re: GB-5600 Resin Compatiblity

    Awesome, thanks for the update kumazo!

    Sent from my Nexus 7 using Tapatalk 2
    Current
    DW-8200MS "Kermit in Smoke" Frogman
    DW-8200F-4 Red Frogman
    GW-200-2 "Navy" Frogman - modded
    DW-5000SP "Bloody Project Team Tough mod"
    DW-9900 Frogman
    DW-5700 with 5600EH crystal "Screwback Eric Haze"
    GW-5000
    Beater G-3110

  7. #6
    Member Sedi's Avatar
    Join Date
    May 2007
    Location
    Bamberg, Germany
    Posts
    13,980

    Re: GB-5600 Resin Compatiblity

    Nice! One more good reason for buying a GB-5600 - I just don't like the time-sync with the phone compared to atomic sync - my phone was way off one time so I turned off the automatic sync and the phone on its own keeps time really badly. Worse than any of my quartz watches (just comparing with non-atomics of course).

    cheers, Sedi
    Cheers
    Sedi

  8. #7
    Member
    Join Date
    May 2012
    Location
    Planet Earth
    Posts
    765

    GB-5600 Resin Compatiblity

    Nice! Thanks for the info. I was hoping the 5600E bezel will fit :)


    ----

  9. #8
    Member
    Join Date
    Oct 2006
    Posts
    1,078

    Re: GB-5600 Resin Compatiblity

    Is that chart correct? I'm pretty sure a GW-5000 is compatible bezel-wise to the GW-M5600 and the chart makes it seem like they are not compatible. Also the GWX5600 looks to be the same as a GW-5000 or GW-M5600 yet it according to the chart is not compatible to either. I don't buy it. Without knowing, I would assume all of the 16mm 5600s' bezels should fit each other as the watch buttons and face are in the same location and size.

  10. #9
    Banned
    Join Date
    Apr 2013
    Posts
    13

    Re: GB-5600 Resin Compatiblity

    Quote Originally Posted by stpete View Post
    I like some of the new GB-5600 resin. But, not sure what else it'll fit. Does anyone have one yet that can figure out where on this chart the GB fits?


    Originally Posted by kumazo

    The outer bezel cover on my atomic solar GWM5610-1 got gouged and scratched up and I need a brand new bezel. I checked Pacparts, but they don't have the bezel.

    I ended up ordering a GWM5600-1ER bezel from Home - Tiktox from the UK. While searching on the Casio Forum, I came across this thread with the resin compatibility chart above. From looking at the chart, I'm not 100% sure, but I think that the GWM5600 bezel also fits the GWM5610. Is that correct?
    I want to make sure that the GWM5600-1ER bezel that I just ordered from TikTox will fit my GWM5610-1.
    Did I order the correct bezel and will the GWM5600-1ER bezel fit the watch case on my GWM5610-1? Please let me know.
    Thank You
    Last edited by Malaka Andreas; April 27th, 2013 at 05:59.

  11. #10
    Banned
    Join Date
    Apr 2013
    Posts
    13

    Re: GB-5600 Resin Compatiblity

    Can anybody confirm that I purchased the "correct" resin case for my atomic solar GWM5610-1?
    I ordered the GWM5600-1ER resin case for my GWM5610-1 from Tiktox in the UK. Will it fit my GWM5610-1?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •