Seals for the pushers of my casio g shock dw 5600?
Like Tree6Likes
  • 1 Post By xevious
  • 1 Post By ocddave
  • 2 Post By Tetsu Tekubi
  • 2 Post By xevious

Thread: Seals for the pushers of my casio g shock dw 5600?

Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Jan 2009
    Location
    Egypt
    Posts
    333

    Seals for the pushers of my casio g shock dw 5600?

    Hello
    I had my dw 5600 for more than 15 years and i wana know if the seals for the pushers must be changed regualry for water tightness or not?

  2. #2
    Member xevious's Avatar
    Join Date
    Feb 2008
    Location
    near Manhattan... Status: Changing course, hard about
    Posts
    6,103

    Re: Seals for the pushers of my casio g shock dw 5600?

    Those pusher o-rings are very well protected and rarely degrade. If your DW-5600 has been subjected to extreme heat for long periods or other stressful environmental conditions, you could replace the pushers (they come with o-rings installed). That's if your DW-5600 is a screw back. If it's a DW-5600E, don't bother.
    amr ashraf likes this.
    In rotation: Citizen Attesa ATV53-2834, Eco Drives | Omega Seamaster | CASIO: TW-7000, MRG-220, RevMan, G-2000D, DW-5700ML, GW-9100 | Seiko SKA-413, SBPG001

  3. #3
    Member ocddave's Avatar
    Join Date
    Jan 2017
    Location
    Bangkok, Thailand
    Posts
    983

    Re: Seals for the pushers of my casio g shock dw 5600?

    If it were me, I would just remove them, smear them in dielectric grease, then reinstall them....done.
    amr ashraf likes this.
    Luminox 1881.BO Field Chrono
    G-Shock GPW-1000T-1A (The BEAST)
    G-Shock GD-350-1BER
    (2) G-Shock GXW-56BB-1JF (The KING - I own 2 because everyone should own at least two...LOL)
    G-Shock GW-9300GB-1JF (Mudman)
    G-Shock GD-350-1C (Custom - Black Bezel)
    G-Shock GWX-5600C-7JF (G-LIDE)
    G-Shock GW-5000-1JF
    G-Shock GD-X6900-1CR
    G-Shock GW-9300DC-1CR (Mudman - Custom - Black Bezel Screws/Strap Screws/Strap keeper/Buckle)
    G-Shock G
    W-M5610-1BJF (I want to enter this one in for a honorary COSC rating, its running about .75 seconds fast per month!)
    G-Shock GB-5600B-1JF
    G-Shock GD-X6900MC-1
    Lum-Tec COMBAT B24 Carbon (Miyota 9015 Japan Automatic Movement)
    Lum-Tec COMBAT B35 Auto (STP 1-11 Swiss Automatic Movement)

  4. Remove Advertisements
    WatchUSeek.com
    Advertisements
     

  5. #4
    Member Tetsu Tekubi's Avatar
    Join Date
    Jan 2010
    Location
    Brisbane, AU
    Posts
    6,043

    Re: Seals for the pushers of my casio g shock dw 5600?

    youre over thinking it, if youre not getting moisture inside then all is well in G land
    nigelw and amr ashraf like this.
    the aritst formerly known as soulbridgemedia
    Whoisdisdointhissynthe tictypeofalphabetapsychedelicfunkin


    IG: soulbridge_media
    IG: thegcollective

  6. #5
    Member
    Join Date
    Jan 2009
    Location
    Egypt
    Posts
    333

    Re: Seals for the pushers of my casio g shock dw 5600?

    I make a pressure test and and the local watch maker told me that the pusher gaskets needs to be replaced
    But the problem is how can i order them?
    Does casio sell spare parts to customers?

  7. #6
    Member ocddave's Avatar
    Join Date
    Jan 2017
    Location
    Bangkok, Thailand
    Posts
    983

    Re: Seals for the pushers of my casio g shock dw 5600?

    Again, unless they are dried and cracked, first try just smearing them in Dielectric grease, they probably will swell back up and continue their happy life. Dielectric Grease has helped me in the past with many types of rubber seals, works wonders on car door seals as well.

    Quote Originally Posted by amr ashraf View Post
    I make a pressure test and and the local watch maker told me that the pusher gaskets needs to be replaced
    But the problem is how can i order them?
    Does casio sell spare parts to customers?
    Luminox 1881.BO Field Chrono
    G-Shock GPW-1000T-1A (The BEAST)
    G-Shock GD-350-1BER
    (2) G-Shock GXW-56BB-1JF (The KING - I own 2 because everyone should own at least two...LOL)
    G-Shock GW-9300GB-1JF (Mudman)
    G-Shock GD-350-1C (Custom - Black Bezel)
    G-Shock GWX-5600C-7JF (G-LIDE)
    G-Shock GW-5000-1JF
    G-Shock GD-X6900-1CR
    G-Shock GW-9300DC-1CR (Mudman - Custom - Black Bezel Screws/Strap Screws/Strap keeper/Buckle)
    G-Shock G
    W-M5610-1BJF (I want to enter this one in for a honorary COSC rating, its running about .75 seconds fast per month!)
    G-Shock GB-5600B-1JF
    G-Shock GD-X6900MC-1
    Lum-Tec COMBAT B24 Carbon (Miyota 9015 Japan Automatic Movement)
    Lum-Tec COMBAT B35 Auto (STP 1-11 Swiss Automatic Movement)

  8. #7
    Member xevious's Avatar
    Join Date
    Feb 2008
    Location
    near Manhattan... Status: Changing course, hard about
    Posts
    6,103

    Re: Seals for the pushers of my casio g shock dw 5600?

    Please provide some photos of your watch (preferably front and back).

    Unfortunately you're in Egypt, so ordering replacement pushers is probably going to be expensive. Here in the USA we rely upon PacParts.com and they're about $3 per pusher... which makes perfect sense to replace completely due to inexpensive cost. If you were to go the route of replacing the pushers, you might be able to order replacement ones through TikTox.com in the UK...

    Otherwise, there are micro gaskets used for the G-Shock pushers. Your watch specialist can remove the module and then the "C" clip holding a pusher in place. He'd then remove a pusher and see how large the gasket is. He might be able to order replacement gaskets. I expect that such gaskets are used in other applications so they're not unique to G-Shocks.

    But again... if you have a nice condition DW-5600C screw back, it's worth doing all this. If not... and it's a DW-5600E you own, then the cost of service will exceed the value of the watch. There are literally millions of used DW-5600E watches are out there in the world. You could find one cheaply with beat up resin and just cannibalize the casing with module inside and then install the resin bezel and band from your own watch. Then you'd have a spare module to use if yours ever fails.
    Last edited by xevious; August 18th, 2017 at 17:37.
    In rotation: Citizen Attesa ATV53-2834, Eco Drives | Omega Seamaster | CASIO: TW-7000, MRG-220, RevMan, G-2000D, DW-5700ML, GW-9100 | Seiko SKA-413, SBPG001

  9. #8
    Member xevious's Avatar
    Join Date
    Feb 2008
    Location
    near Manhattan... Status: Changing course, hard about
    Posts
    6,103

    Re: Seals for the pushers of my casio g shock dw 5600?

    Huh. Member since 2009. Figured that the OP would get back to us...
    In rotation: Citizen Attesa ATV53-2834, Eco Drives | Omega Seamaster | CASIO: TW-7000, MRG-220, RevMan, G-2000D, DW-5700ML, GW-9100 | Seiko SKA-413, SBPG001

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Similar Threads

    1. Replies: 4
      Last Post: July 21st, 2013, 00:02
    2. FS: casio G-SHOCK 4 vintage DW-5200 DW-5300 DW-5600 DW-5700
      By amel dw-5xxx in forum Watches - Private sellers and Sponsors
      Replies: 5
      Last Post: March 28th, 2009, 17:25
    3. FS: DW-8300; DW-8195-1A4; DW-8000; DW-8010; DW-8030; DW-8040; DW-8050 - 7 G-shock Watches
      By Peekaboo in forum Watches - Private sellers and Sponsors
      Replies: 4
      Last Post: August 12th, 2008, 15:14
    4. FS: CASIO G-Shock DW-8195-1A4 , DW-8010G-1 , DW-8030G-1V (DW-8195 DW-8010 DW-8030)
      By Peekaboo in forum Watches - Private sellers and Sponsors
      Replies: 6
      Last Post: July 9th, 2008, 15:24
    5. FS: DW-8195-1A4 , DW-8000 , DW-8010, DW-8030 , DW-8040 , DW-8050 - 6 CASIO G-Shock Watches
      By Peekaboo in forum Watches - Private sellers and Sponsors
      Replies: 14
      Last Post: June 22nd, 2008, 08:25

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •