Omega Seamaster Diver 300M Ceramic & Titanium Review
Like Tree14Likes

Thread: Omega Seamaster Diver 300M Ceramic & Titanium Review

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    Sponsor Timeless Luxury Watches's Avatar
    Join Date
    Jan 2010

    Omega Seamaster Diver 300M Ceramic & Titanium Review

    The recent all-new Omega Seamaster Diver 300M line has expanded to include a slightly larger version that, in addition to dropping the date complication, introduces a combination of two high-end watchmaking materials. Join me as we take a close look at the new Diver 300M Ceramic & Titanium.

    I loved the two new Diver 300Ms I reviewed last time (click here to read that if you haven't already) because they systematically improved their legendary predecessors in almost every way, from how it looked to the movement inside. Omega has largely stuck to the same design used in those models, but has created a version that's even more consistent with the spirit of tool watches.

    The evidence for that is visible throughout. There's no colorful dial available, for instance, and the black dial lacks the bright red accents. No, the Ceramic & Titanium is all business, and has consequently opted for a more buttoned-down monochrome look.

    But perhaps just as importantly, it's dropped the date. I've no doubt that this will be a divisive move, but I'm completely in favor of it. In fairness, you could already get a no-date Diver 300M, but only in their far more expensive Sedna gold/tantalum LE, which, while gorgeous, moves very far away from the tool watch look.

    In its place, we find a complete 6:00 hour marker, instead of the bisected one found in the date-equipped model. I think this was a wise decision, because it simplifies the dial, improves legibility, and removes a complication that isn't particularly useful to people who find themselves underwater. The more we can return a watch to its essence, to its core design goals, the better, I generally find. For those that rely on a date too much to give it up, of course, there are still plenty of Diver 300Ms available with that complication too, so it's really more that there's something for everyone now.

    Aside from going monochrome and skipping the date, the dial design has remained remarkably similar to the other new models. We still find the glossy ceramic dial with an impressively intricate wave pattern, and an overall extremely high quality. But that isn't to say that there aren't more subtle changes if you look close enough.

    For instance, while the overall shape of the hands has remained very similar, or even identical, you might have missed that they're now brushed instead of polished, which gives them a slightly darker appearance in most lighting.

    Speaking of which, the lume is, as you would expect, quite excellent. As always, I give extra credit for brands which go the extra mile in aiding orientation and clarity with lume. Here we see that not only has Omega used a different shape for the tip of the hour and minute hands, but different colors as well. Also note that the 12:00 marker is distinct from the other cardinal markers, which makes it almost impossible to get the orientation of the watch confused. It's things like these that remind us of the role that design has to play in legibility, decisions we often take for granted in our everyday use.

    Now we can get to the key feature of the Seamaster Diver 300M Ceramic & Titanium: the ceramic and titanium. Omega has long been one of the driving forces for material science in the watch industry, being one of the first companies to mass-produce silicon hairsprings, and it has also played a major role in the modern popularization of ceramic cases. The new Ceramic and Titanium is more than just a design that incorporates both materials, but almost more of a series of ceramic and titanium layers.

    That starts with the ceramic bezel ring, which has become something of a hallmark in high-quality dive watches in general. Ceramic bezels just make sense, because this is one of the easiest to scratch areas of a watch, and ceramic makes that nearly impossible.

    Underneath the bezel insert is titanium, another material closely associated with high-end tool watches, and beneath that is the actual case, made out of ceramic. This is a great time to discuss the beautiful finishing of the ceramic, going from a metallic-looking brush to the perfect gloss that we more often associate with ceramic. It's at once both elegant and aggressive.

    In terms of dimensions, the Ceramic and Titanium is slightly larger than its less-serious contemporaries. Those are 42mm while the new model is 43.5mm. It's a bit thicker as well, at roughly 14.5mm, about 0.8mm thicker than the non-ceramic versions. I get the increase in diameter, insofar as the new model wants to be a more focused diving watch and less of an everyday watch, but why it got thicker is a bit mysterious, since it actually dropped the date. 14.5mm is pretty consistent with other modern dive watches, but I wouldn't have minded if it had stuck to 13.7mm, or even become slightly thinner. My other measurements indicate 51mm from lug to lug, and 21mm between the lugs.

    Looking now to the titanium case back we see the Naiad lock. This patented system allows Omega to orient the writing of the case back with that of the rest of the case, which is why you see Diver 300M perfectly at the top in this photo. It may seem trivial, but I wish every company did things like this and I've never quite understood why there wasn't a bigger push among consumers, given how watch collectors, like myself, trend towards the somewhat obsessive regarding things like this.

    The Seamaster Diver 300M Ceramic & Titanium is available with two different straps, this black rubber and also a silver/black striped NATO. I haven't seen the latter in person yet, but it looks great in photos, and both versions are priced the same. That said, I'm sufficiently impressed with the comfort and fit of the rubber strap that it's the one I'd pick.

    Now we get to the movement, which is slightly different from that of other Seamaster Diver 300Ms. Those currently use the 8800, while this one uses the 8806. The difference is quite small, though, the 8806 only lacking a date complication so far as I'm aware.

    The other great properties of that movement remain, from the free sprung balance, to the silicon hairspring, to the 55 hour power reserve. The power reserve is relatively long, as the average watch today has about 40 hours, but it's also slightly shorter than that of the 8900, owing to its single mainspring as opposed to the dual mainsprings of the 8900. Those who really care about the extra five hours can instead opt for a Planet Ocean.

    It's still quite beautiful as well, with its trademark Arabesque lines. Like the 8800, however, it lacks the independently adjustable hour hand. Since the compensation for that with the 8800 was a quickset date, a feature the 8900 lacks, and the 8806 has no date to set, it would have been nice to see the independent hour hand brought back in the 8806, and I'm not sure why they didn't.

    Regardless, what you get is an incredibly sophisticated movement with many advanced features. Perhaps the most notable of these is its METAS-certified anti-magnetic properties. Unlike most anti-magnetic watches, which use a soft iron core to protect the movement, the 8806 is virtually immune to magnetic fields to begin with, allowing it to have a sapphire case back. It's a more elegant solution to the problem of magnetism, and while you'll find movements like this one in many Omegas, of both the dress and tool varieties, it does add somewhat to the tool watch credentials of the model.

    Essentially, the new Seamaster Diver 300M Ceramic & Titanium, or particularly the we're looking at (the model number for the black rubber strap), is a more focused Seamaster. Although the steel versions of the watch are pretty serious in their own right, this is clearly the purpose-driven model of the bunch, skipping the date, increasing the size and dropping any colored accents while using stronger and lighter materials throughout. At $8,100, the price is pretty much what we'd expect for a great dive watch made entirely out of ceramic and titanium, but it also means that those looking for the best value might want to stick to the steel models. The black dial/rubber strap/steel equivalent of this watch, for instance, the, is just $4,900. For those who want one of the very best dive watches that Switzerland can make, however, the Seamaster Diver 300M Ceramic & Titanium may be the logical choice.

    You can pre-order the Omega Seamaster Diver 300M Ceramic & Titanium by clicking here.
    Last edited by Timeless Luxury Watches; May 4th, 2019 at 11:25.

  2. #2
    Member WIS_Chronomaster's Avatar
    Join Date
    Sep 2007

    Re: Omega Seamaster Diver 300M Ceramic & Titanium Review


  3. #3
    Join Date
    Aug 2012

    Re: Omega Seamaster Diver 300M Ceramic & Titanium Review

    Thats just stupid. Should be all ceramic.

  4. Remove Advertisements

  5. #4
    Member Sir-Guy's Avatar
    Join Date
    Apr 2017

    Re: Omega Seamaster Diver 300M Ceramic & Titanium Review

    Great write up and awesome photos. I do wish they hadn’t made it bigger, though. One of the cool things about SMPs is how short the lug-to-lug is (which my 6.5” wrist appreciates). 43.5mm and >50mm is getting pretty big!

    Very nice review. I agree with you about the lack of a quickset hour hand.

  6. #5
    Join Date
    Nov 2015

    Re: Omega Seamaster Diver 300M Ceramic & Titanium Review

    Thanks for doing the review! Love Timeless’ in-depth reviews like this!

  7. #6
    Member carlhaluss's Avatar
    Join Date
    Oct 2007
    Vancouver BC Canada

    Re: Omega Seamaster Diver 300M Ceramic & Titanium Review

    Quote Originally Posted by Sir-Guy View Post
    Great write up and awesome photos. I do wish they hadn’t made it bigger, though. One of the cool things about SMPs is how short the lug-to-lug is (which my 6.5” wrist appreciates). 43.5mm and >50mm is getting pretty big!

    Very nice review. I agree with you about the lack of a quickset hour hand.
    I didn't really care for the extra size either, and also lack of quickset hour hand. Until I saw the watch in real life. It looks even more amazing. Even though I would never go for a ceramic watch, the combination of the titanium with it is stunning. And even the rubber strap suits it very well, although a titanium bracelet option would be nice IMO.

    This is an excellent review and photos!

    Those who possess a sense of entitlement are seldom satis​fied.

  8. #7
    Member sticky's Avatar
    Join Date
    Apr 2013
    South Yorkshire

    Re: Omega Seamaster Diver 300M Ceramic & Titanium Review

  9. #8
    Member Nokie's Avatar
    Join Date
    Jul 2011
    Northern California

    Re: Omega Seamaster Diver 300M Ceramic & Titanium Review

    Great review. It looks like another quality time piece from Omega.
    "Either he's dead or my watch has stopped"
    Groucho Marx

    "The only reason for time is so that everything does not happen at once..."
    Albert Einstein

  10. #9
    Member TwentiethCenturyFox's Avatar
    Join Date
    Mar 2014
    Las Vegas, NV

    Re: Omega Seamaster Diver 300M Ceramic & Titanium Review

    Fantastic review as usual.

  11. #10
    Member Chris Stark's Avatar
    Join Date
    Sep 2015
    Near this half dollar

    Re: Omega Seamaster Diver 300M Ceramic & Titanium Review

    Awesome looking in these pics but at 43.5mm x 14.5mm I'm out. Still would like to see it in person though.
    "Nothing happens until something moves." -Albert Einstein
    Damasko | Hamilton | Longines | Mido | Orient | Oris | Rolex | Timex

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Similar Threads

    1. Replies: 0
      Last Post: January 25th, 2019, 22:10
    2. OMEGA Seamaster DIVER 300M Ceramic & Titanium
      By Watchuseek Feeds in forum Bloggers United
      Replies: 0
      Last Post: January 23rd, 2019, 04:20
    3. Replies: 5
      Last Post: April 13th, 2017, 03:26
    4. Omega Seamaster Diver 300M ETNZ Hands-On Review
      By Robert-Jan Broer in forum Bloggers United
      Replies: 0
      Last Post: August 24th, 2015, 17:40
    5. Omega SeaMaster Diver 300M Ceramics Co-Axial 41 mm
      By Rythem in forum Watches - Dealers and Manufacturers
      Replies: 1
      Last Post: August 28th, 2014, 19:03

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts