Bezel Removal Video You'll should like this one
Like Tree15Likes

Thread: Bezel Removal Video You'll should like this one

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    Member bazza.'s Avatar
    Join Date
    Jan 2010
    Location
    UK at the min
    Posts
    861

    Bezel Removal Video You'll should like this one

    Rolex Kermit, DRSD, SD4k ,Milgauss GV ,Red Sub ,OP 39 Red ,Batman ,Panerai 177 ,Seiko Tuna 007 ,Baby Monster, SQ100 ,Breitling Colt 41 ,Casio G-Shock 5610
    Zenith 1931 Pocket Watch , Laco ​Aachen Taupe , Memmingen , Corum Jumping Hours LE 001/300 , Sinn EZM1LE , EZM2-GSG9 , U2s , EZM13 , UX-GSG9 ,556-55Le

  2. #2
    Member Dan Pierce's Avatar
    Join Date
    Feb 2006
    Location
    Northern Kentucky
    Posts
    5,355

    Re: Bezel Removal Video You'll should like this one

    Nice video, thanks for sharing
    dP
    bazza. likes this.

  3. #3
    Member
    Join Date
    Jul 2018
    Location
    Out on the prairie
    Posts
    268

    Re: Bezel Removal Video You'll should like this one

    Thank you for going into the ratchet system.
    Enjoyed it.
    bazza. likes this.

  4. Remove Advertisements
    WatchUSeek.com
    Advertisements
     

  5. #4
    Member
    Join Date
    Jun 2018
    Location
    Germany
    Posts
    108

    Re: Bezel Removal Video You'll should like this one

    ....hmmm. At SINN Service the tell you never to open the 4th screw at 12 o-clock. A gave it a try: Indeed no need to open it.
    Attention: this screw is a little longer than the other 3 in some watches. Using it in the wrong position will cause problems. Bezel will not move any more.

    - if you have a U2 older than 2006: There is an different (older) system used.
    - often a little silicone-spray helps if screws are loose but bezel is hard to remove.
    Last edited by UOhrli; January 1st, 2020 at 18:30.
    bazza. likes this.

  6. #5
    Member zeit_time's Avatar
    Join Date
    Nov 2019
    Location
    Boston
    Posts
    194

    Re: Bezel Removal Video You'll should like this one

    Thanks for putting this up!
    bazza. likes this.

  7. #6
    Member bazza.'s Avatar
    Join Date
    Jan 2010
    Location
    UK at the min
    Posts
    861

    Re: Bezel Removal Video You'll should like this one

    Quote Originally Posted by UOhrli View Post
    ....hmmm. At SINN Service the tell you never to open the 4th screw at 12 o-clock. A gave it a try: Indeed no need to open it.
    Attention: this screw is a little longer than the other 3 in some watches. Using it in the wrong position will cause problems. Bezel will not move any more.

    - if you have a U2 older than 2006: There is an different (older) system used.
    - often a little silicone-spray helps if screws are loose but bezel is hard to remove.
    Your right the the screw at 12 o'clock is longer I believe it stops the inner ring from turning
    I still don't know why they don't use the same system the UX is far better than the U2
    Rolex Kermit, DRSD, SD4k ,Milgauss GV ,Red Sub ,OP 39 Red ,Batman ,Panerai 177 ,Seiko Tuna 007 ,Baby Monster, SQ100 ,Breitling Colt 41 ,Casio G-Shock 5610
    Zenith 1931 Pocket Watch , Laco ​Aachen Taupe , Memmingen , Corum Jumping Hours LE 001/300 , Sinn EZM1LE , EZM2-GSG9 , U2s , EZM13 , UX-GSG9 ,556-55Le

  8. #7
    Member
    Join Date
    Jun 2018
    Location
    Germany
    Posts
    108

    Re: Bezel Removal Video You'll should like this one

    Quote Originally Posted by bazza. View Post
    Your right the the screw at 12 o'clock is longer I believe it stops the inner ring from turning
    I still don't know why they don't use the same system the UX is far better than the U2
    Btw: I assume the 3 "normal" screws are made to hold the bezel. The longer screw at 12 is for fine-adjustment and minimizes to bezel movement (horizontal).

  9. #8
    Member NC_Hager626's Avatar
    Join Date
    Sep 2018
    Location
    Eastern ON
    Posts
    3,634

    Re: Bezel Removal Video You'll should like this one

    Thanks for putting the video together. It was very informative about the two different bezels used between the UX and U2.
    bazza. likes this.

  10. #9
    Member bazza.'s Avatar
    Join Date
    Jan 2010
    Location
    UK at the min
    Posts
    861

    Re: Bezel Removal Video You'll should like this one

    Quote Originally Posted by UOhrli View Post
    Btw: I assume the 3 "normal" screws are made to hold the bezel. The longer screw at 12 is for fine-adjustment and minimizes to bezel movement (horizontal).
    From what I could see the screw at 12 o-clock is only there to stop the side play
    And the fine adjustment is set by which holes in the case which you place the
    Steel spring into sir
    Rolex Kermit, DRSD, SD4k ,Milgauss GV ,Red Sub ,OP 39 Red ,Batman ,Panerai 177 ,Seiko Tuna 007 ,Baby Monster, SQ100 ,Breitling Colt 41 ,Casio G-Shock 5610
    Zenith 1931 Pocket Watch , Laco ​Aachen Taupe , Memmingen , Corum Jumping Hours LE 001/300 , Sinn EZM1LE , EZM2-GSG9 , U2s , EZM13 , UX-GSG9 ,556-55Le

  11. #10
    Member sticky's Avatar
    Join Date
    Apr 2013
    Location
    South Yorkshire
    Posts
    58,236

    Re: Bezel Removal Video You'll should like this one

    Really nice to see how bezels can be taken off Sinns.
    bazza. likes this.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •