Sub 1000T endlink and case question

Thread: Sub 1000T endlink and case question

Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Apr 2009
    Posts
    185

    Sub 1000T endlink and case question

    So far I am on strike two in finding the correct endlink for a Sub 1000T Caribbean and something occurred to me....

    Did the case / bracelet / endlink ever change on any of the 1000T's? Maybe my problem is I'm assuming they were all the same aside from dials and COSC certifications?

    The first try was generously sourced off the boards and it fit the 20mm lug spacing but was slightly taller with "tabs" instead of the more flush fit of the correct one. It was wearable but fit loose and pivots away from the case. That was fine for while but I ultimately ordered what I thought was the correct replacement from Doxa. It came in from Switzerland very well packaged and labeled as Sub 1000T, but it's exactly like the taller ill fitting one. I am assuming these are for a 1200 that has a thicker case but I could be way off base?

    Any ideas?

  2. #2
    DOXA Forum Moderator subkrawler's Avatar
    Join Date
    Oct 2006
    Location
    United States
    Posts
    5,729

    Re: Sub 1000T endlink and case question

    Your first set with "tabs" sounds like the hollow end-links for a 600T. Not sure about the 1200T end-links...I only have a 600T, and a 1000T. Can you post some pics?
    "The most beautiful objects are those built for purpose. Few things are more thrilling than the unrestrained use of tools most have mistaken for luxuries" -unknown

  3. #3
    Member
    Join Date
    Apr 2009
    Posts
    185

    Re: Sub 1000T endlink and case question

    It's not a hollow link for sure. I've had a 1200 and a 750 but never at the same time to compare. My guess was the 1200 since it was thicker for the HRV and the bracelet followed suit.

    This isn't the best illustration, but does show the variance. The left side is the correct link.

    Name:  8686186522_ee90a7f4f2_b.jpg
Views: 134
Size:  391.3 KB

  4. Remove Advertisements
    WatchUSeek.com
    Advertisements
     

  5. #4
    DOXA Forum Moderator subkrawler's Avatar
    Join Date
    Oct 2006
    Location
    United States
    Posts
    5,729

    Re: Sub 1000T endlink and case question

    Quote Originally Posted by jinxed View Post
    Name:  8686186522_ee90a7f4f2_b.jpg
Views: 134
Size:  391.3 KB
    The end-link on the right doesn't look like anything I've seen, so I don't know what it goes to. Those are the ones you bought off the forum, right?

    Here's what the hollow end-link, from my 600T looks like...
    Name:  71DB9584-123C-4772-811C-E946AC21BD51-1986-00000140ADF59EFA-1.jpg
Views: 112
Size:  85.0 KB

    and the end-link from my 1000T TUSA.

    Name:  587656B6-3FAF-4A74-AE5A-3B31D0B22CEA-1986-00000140C1C36210.jpg
Views: 111
Size:  67.1 KB
    "The most beautiful objects are those built for purpose. Few things are more thrilling than the unrestrained use of tools most have mistaken for luxuries" -unknown

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •